When you decide to install a new floor, you may want to know how to remove hardwood floor. If you have a solid slab of wood, this can be easier to remove.
On the other hand, if you have a wood-chip floor, the process will be a little more complicated. You’ll need to use a pry bar and leverage the bar against the wood.
The best Pieces of Advice: How to Remove Hardwood Floor
Therefore, if you’re planning to install a new wood floor in your home, you must first remove the existing floor.
When removing hardwood flooring, you may notice that sawdust and wood chips are everywhere. To avoid exposing yourself and your home to these particles, you should wear protective gear.
If you have a lot of flooring, clear the room of all furniture and electronics. It will also make cleanup easier and keep your property safe. Follow these steps to remove the floor properly.
Is Hardwood Flooring Hard to Remove?
Usually, people ask if the hardwood floor is hard to remove; actually, it is. However, some tips will help you to make this task easier. With these first tips, you will know how to point your floor in small sections and get the boards into small areas.
You can identify if you need to remove the entire floor or only a section.
In that way, if you cut each section, you’ll have more control of the steps of the entire process. In addition, you can avoid overstressing thinking about the whole floor because it can be tremendous on occasions. If you have any doubts, don’t hesitate to contact us to get personalized information!
Tips to Replace Hardwood Floors – What is the Process to Remove a Hardwood Floor?
Keep reading this blog, and you will learn the most straightforward tips on how to remove hardwood floor. You can start your process by following those tips.
- Measure the area
- Use a circular saw
- Remove the staples
- Use a dust mask
- Replace the hardwood floor
Measure the Area | How to Remove a Hardwood Floor: Small Sections or Large Sections
Once you have all the tools necessary, it’s time to prepare the area. To prepare the site for removing hardwood, measure the room’s length and mark it.
It’s essential to measure the entire room or the entire house to ensure that you have enough space to remove the flooring. If you have ample space, it may be best to do it in smaller sections. You can also use a tape measure to mark the exact length of the room or entire house.
Mark the area with painter’s tape. This way, you can save the remaining hardwood floor and protect the edges from damage.
Afterward, you’ll need a circular saw and a lot of patience and care. To start, set your saw depth to the depth of the old flooring. You’ll need to work carefully to prevent damaging the subfloor underneath the floor.
Use a Circular Saw in Wood Flooring
Using a circular saw is an essential tool for removing hardwood floors. This tool must be adjusted to be lower than the thickness of the flooring. While cutting the floor, make sure to remain on your knees while using the circular saw.
Once you’ve determined the size of the hardwood slab, use a circular saw to remove the hardwood floor. You can use a tape measure to calculate the distance between the two wood areas to make it easier.
You’ll need to cover all surfaces before you begin. Once you have a space, you’ll need to pull the board back. You’ll need to be able to fit the pry bar underneath a section of the floor.
The use of a circular saw will prevent you from getting hurt. This method can also help you avoid injuries while removing the hardwood floor.
Remove the Nails and Staples | Tips How to Remove Hardwood Floor
The next step is to remove the nails and staples that stuck to the hardwood floor. You can either use a shop vacuum to clean up the area and remove the nails with a chisel or a giant magnet.
Next, remove the old flooring by dragging it off. Remember that it is easier to remove damaged pieces of flooring than others.
After removing the pins, you’ll need to prepare the room with a plastic sheet or newspaper; in addition, after removing the staples, you’ll need to clean the area thoroughly with a shop vacuum.
Use a Dust Mask
You’ll need to put on a dust mask and safety eyewear before you begin. During the removal process, be sure to keep the area well-ventilated. This way, you’ll avoid injuries from sharp wood edges.
If you’ve used an air chisel, you can remove the glue and the nails. In addition to wearing the right gear, you’ll need to collect the pins. This process will take several days, so make sure you plan your time accordingly. Contact us now if you want to leave your project in professionals’ hands!
Before tearing out the old hardwood floor, you should first cut it into small pieces. Cutting the panels into smaller sections will prevent the splintering of the wood, which could be very dangerous when thrown into a dumpster.
Clean the Area to Begin the Next Process
After collecting the pins, it’s essential to clean the entire area. You can use a garbage bin before starting the replacement process. You cannot skip this step because you’ll need to clear the site to work well.
Replace the Hardwood Floor
One point more in advance of the demolition, make sure to set the saw to the proper depth. If you’re not ready to buy one, renting one will work. After that, you can use the saw to cut out the pieces of the floor.
Once you’ve removed the old floor, you’ll need to replace it with the new one. To do this, you’ll need to take out all the nails. You need to set the saw to the correct depth to remove the pins.
After you’ve cut the boards, you can use the claw tool to cut them into smaller pieces. Then, you’ll need to set the nail to the correct depth.
Can hardwood floors be removed and reused?
Maybe now you’re thinking about whether it’s possible to reuse your old floor after removing it. The answer is yes, but remember that you need a clear process without mistakes due to the damage you can cause to the bottom if you don’t do the removal correctly.
The hardwood floor can be used after removing, thanks to the durability of the wood and its properties. However, it’s vital to clarify that it can be achieved only with the floor in good condition.
Look for Trustworthy Professionals to Learn More About How to Remove Hardwood Floor
Now you have valuable information about how to remove hardwood floor; if you want to hire incredibly skilled professionals, don’t hesitate to contact us today and get a free estimate.
Santiago’s Hardwood Floor is your better choice to ensure efficient results. Also, you can look for other services, such as wood floor refinishing in Philadelphia. Don’t waste your time; call us today.